The JA-110Z-B is designed to allow you to join BUS lines in the JA-100 system.
It can be installed in the JA-190PL.

Specifications
- Maximum voltage AC: 42 V
- Maximum voltage DC: 60 V
- Maximum current: 2 A

Bus expander is used for powering and connecting up to 16 detectors with contact outputs. It is possible to install the module straight into the JA-106K control panel.

Technical specifications
- Power: 12 V (9 … 15 V)
- Current consumption (all outputs turned on): 25 mA
- Caution: the consumptions of the detectors connected to the +U and GND terminals have to be added to the system power backup calculation.
- Maximum acceptable load of one output from +U and GND: 100mA
- Maximum acceptable load of all outputs from +U GND: 4 x 100mA
- Dimensions: 102 x 66 x 20 mm
- Classification: Grade II
- according to: EN 50131-1, EN 50131-3
- Operational environment according to: EN 50131-1 II. Indoor general
- Operating temperature range: -10 to +40 °C
- Also complies with EN 50130-4, EN 55022

The module provides 8 inputs designed especially for connecting magnetic detectors. Installation into a JA-190PL universal multipurpose box is recommended (or into a KU-68 wall - mounted universal box).

Technical specifications:
- Power: from the control panel digital BUS 12 V (9 … 15 V)
- Current consumption: 15mA ; 5mA in standby mode
- Dimensions: 50x 38 x 14 mm
- Classification: Grade 2
- According to: EN 50131-1, EN 50131-3
- Operational environment: according to EN 50131-1 II. Indoor general
- Operating temperature: -10 to +40 °C
- Also complies with: EN 50130-4, EN 55022

Wireless module with two universal inputs